Ask Proxima 9280 - Manual (Page 11)

11
R G B H V
PC IN-1
PC IN-2
analog digital PC control 1
PC control 2
audio 1
audio 2
(stereo)
(stereo)
AV IN
monitor OUT
S-video R– audio– L
Y/video– Cb/Pb– Cr/Pr
(mono)
R G B H V
R G B H V
PC IN-1
PC IN-2
analog digital PC control 1
PC control 2
audio 1
audio 2
(stereo)
(stereo)
AV IN
monitor OUT
reset R/C jack
S-video R– audio– L
Y/video– Cb/Pb– Cr/Pr
R– audio– L video
(mono)
CONNECTING THE PROJECTOR
TERMINALS OF THE PROJECTOR
When controlling the computer
with the Remote Control of
this projector, connect the
mouse port of your personal
computer to these terminals.
(Refer to P14.) Connect the S-VIDEO
output from the video
equipment to this jack.
(Refer to P13.)
Connect the audio output (stereo)
from the computer to these jacks.
(Refer to P14.)
Connect the audio output
from the video equipment
to these jacks.
(Refer to P13.)
CONTROL PORT (1/2) CONNECTORS
COMPUTER AUDIO INPUT (1/2) JACKS
AUDIO INPUT JACKS
VIDEO INPUT JACKS
(Y/VIDEO, Pb/Cb, Pr/Cr)
S-VIDEO INPUT JACK
Connect the composite video output from the
video equipment to the VIDEO/Y jack or
connect the component video outputs to the
Y/VIDEO, Pb/Cb and Pr/Cr jacks.
(Refer to P13.) Connect the computer output to
these terminals. (Refer to P14.)
COMPUTER INPUT-2
TERMINALS (BNC x 5)
Connect the computer output
to one of these terminals.
(Refer to P14.)
COMPUTER INPUT-1
TERMINALS (DIGITAL/ANALOG)
INPUT TERMINALS
INPUT TERMINALS
OUTPUT TERMINALS
This projector has INPUT TERMINALS and OUTPUT TERMINALS on its side for connecting computers and
video equipment. Refer to the figure on pages 11 to 14 and connect properly.