Panasonic KX-TS4200B - Manual (Page 46)

Caller ID Service
46 For assistance, please visit http://www.panasonic.com/phonehelp
Erasing the area code
Important:
L
Make sure that the unit is in standby
mode.
1
Press {MENU/SET}.
2
Select “Advanced Setup”, then
press {MENU/SET}.
3
Select “Area Codes”, then press
{
MENU/SET}.
4
Select the area code you want to
erase, then press {MENU/SET}.
5
Press {ERASE}.
6
Select “Yes?”, then press {ERASE}
or {MENU/SET}.
L
To cancel, select “No?”, then press
{
MENU/SET}.
7
Press and hold {MENU/SET} to
return to standby mode.
Note:
L
To return to the previous menu, press
{<}
.
Storing caller information
into the phonebook
Important:
L
Make sure that the unit is in standby
mode.
1
Press {CALLER ID}.
2
Select the desired item, then press
{
MENU/SET}.
3
Select “Copy To PhBook”.
L
To edit the phone number, press
{ >}
repeatedly until the phone
number is shown in the desired
format. ({<} does not work.)
4
Press {MENU/SET}.
5
Press {CALLER ID} to return to
standby mode.
Note:
L
To return to the previous menu, press
{<}
.
➔Area Codes
Reset All
Ringer On/Off
[V/^]:Scroll
KXT4200_OI.book Page 46 Friday, September 1, 2006 8:53 AM