Panasonic KX-TS4200B - Manual (Page 30)

Making/Answering Calls
30 For assistance, please visit http://www.panasonic.com/phonehelp
Flash time
The flash time depends on your
telephone exchange or host PBX. You
can select the following flash time: 80
ms
, 100 ms, 200 ms, 300 ms, 400 ms,
500 ms
, 600 ms, and 700 ms.
The default setting is “600 ms”.
Important:
L
Make sure that the unit is in standby
mode.
1
Press {MENU/SET}.
2
Select “Phone Setup”, then press
{
MENU/SET}.
3
Select “Flash Time”, then press
{
MENU/SET}.
4
Select the desired setting, then press
{
MENU/SET}.
5
Press and hold {MENU/SET} to
return to standby mode.
Note:
L
To return to the previous menu, press
{<}
.
L
If you are connected via a PBX, a
longer flash time may be necessary to
use PBX functions (transferring a call,
etc.). Consult your PBX installer for
the correct setting.
Temporary tone dialing (for
rotary/pulse service users)
You can temporarily switch the dialing
mode to tone when you need to access
touch tone services (for example,
answering services, telephone banking
services, etc.).
Press {*} (TONE) before entering
access numbers which require tone
dialing.
➔Flash Time
Hold Reminder
Handsfree Mode
[V/^]:Scroll
Flash Time
=600 ms
[SET]:Save
[V/^]:Change
KXT4200_OI.book Page 30 Friday, September 1, 2006 8:53 AM