Panasonic KX-TS4200B - Manual (Page 45)

Caller ID Service
For assistance, please visit http://www.panasonic.com/phonehelp 45
Editing a caller’s phone
number before calling back
You can edit a phone number in the
caller list by removing its area code and/
or the long distance code “1”.
Important:
L
Make sure that the unit is in standby
mode.
1
Press {CALLER ID}.
2
Select the desired item, then press
{
MENU/SET}.
3
Select “Dial Alternate”.
4
Press {>} to show the alternate
forms of the number. ({<} does not
work.)
1 Local phone number
2 Area code - Local phone number
3 1 - Area code - Local phone
number
5
Press {MENU/SET}.
Note:
L
To return to the previous menu, press
{ < }
.
Area codes
You can program this phone to
recognize one home and up to 5 local
area codes.
L
If you set the home area code, the
display shows the 7 digits of the phone
number when you receive a call from
your home area code.
L
If you set the local area code, you can
dial 10 digits (without dialing “1”) to
make a call outside your home area
code and the display shows the 10
digits (without “1”) of the phone
number when you receive a call from
one of your local area codes.
Important:
L
Make sure that the unit is in standby
mode.
1
Press {MENU/SET}.
2
Select “Advanced Setup”, then
press {MENU/SET}.
3
Select “Area Codes”, then press
{
MENU/SET}.
4
Select the area code you want to set,
then press {MENU/SET}.
5
Enter the area code, then press
{
MENU/SET}.
6
Press and hold {MENU/SET} to
return to standby mode.
Note:
L
To return to the previous menu, press
{ < }
.
Example: 321-5555
Example: 555-321-5555
Example: 1-555-321-5555
➔Area Codes
Reset All
Ringer On/Off
[V/^]:Scroll
➔Home Area Code
Local Area C1
Local Area C2
[V/^]:Scroll
KXT4200_OI.book Page 45 Friday, September 1, 2006 8:53 AM