Panasonic KX-TS4200B - Manual (Page 25)

Making/Answering Calls
For assistance, please visit http://www.panasonic.com/phonehelp 25
Making/Answering Calls
Making calls
Using the handset
1
Lift the handset.
L
The prime line (see “Prime line” on
page 50) is automatically selected
and the line indicator lights.
L
The display shows the length of
the call.
2
Dial the phone number.
L
The dialed number is displayed. If
you dial a phone number longer
than 15 digits, all the digits will be
shifted to the left side.
3
When you finish talking, place the
handset on the cradle.
L
The line indicator goes out.
L The length of the call will remain
on the display for a few seconds.
Note:
L
The line indicator flashes while
another phone is using the line.
Using the speakerphone
1
Press {SP-PHONE}.
L
The SP-PHONE indicator lights.
L
The prime line (see “Prime line” on
page 50) is automatically selected
and the line indicator lights.
L
The display shows the length of
the call.
2
Dial the phone number.
L
The dialed number is displayed. If
you dial a phone number longer
than 15 digits, all the digits will be
shifted to the left side.
L
If you misdial, press {SP-PHONE}
and start again from step 1.
3
When you finish talking, press
{
SP-PHONE}.
L
The SP-PHONE and the line
indicators go out.
L The length of the call will remain
on the display for a few seconds.
Note:
L
The line indicator flashes while
another phone is using the line.
L
Use the speakerphone in a quiet
environment.
L
In step 1, you can select a line by
pressing a line button with an unlit
indicator instead of pressing
{
SP-PHONE}. Be sure that the
handsfree mode is set to
“Speakerphone” (see “Handsfree
mode” on page 50).
Switching between handset and
speakerphone
Switching from handset to
speakerphone
Press {SP-PHONE}, then place the
handset on the cradle.
Switching from speakerphone to
handset
Lift the handset.
Adjusting the handset volume (5
levels) or speaker volume (8 levels)
Press {-} or {+} repeatedly while
talking.
Redialing the last number dialed
1
Lift the handset or press
{
SP-PHONE} or a line button.
2
Press {REDIAL/PAUSE}.
Making a call using the redial list
The last 6 phone numbers dialed are
stored in the redial list.
1
Press {REDIAL/PAUSE}.
2
Press {V} or {^} to select the
desired number.
3
Lift the handset or press
{
SP-PHONE} or a line button.
KXT4200_OI.book Page 25 Friday, September 1, 2006 8:53 AM