Panasonic BB-HCM381A - Manual (Page 28)

Operating Instructions
28
1.2.6 Setting Home Position/Alarm Position/Preset Button
Registering Home Position/Alarm Position
A home position or 2 alarm positions can be registered. When restarted, the
camera takes a home position. If the Lens Position When Triggered setting is set
(see page 102), the camera takes a alarm position after the External I/O detects a
signal. See page 128 for the External I/O.
1.
Click [Program].
• [Program] switches to [Cancel].
Click [Cancel] to quit without saving
changes.
2. Pan and tilt the camera to a desired
position.
3.
Zoom to the desired position.
4.
Adjust the focusing if necessary.
5.
Click the home position button or the
alarm position button.
6. Click [Save] to register, or click [Back]
and [Cancel] to cancel.
•
If "Success!" is displayed, click
[Back].
Zoom
Focus
Program
Alarm1
Alarm2
Preset
Scan
Pan / Tilt
∗
- +
∗
Alarm
Position
Pan/Tilt
Zoom
Focus
Program
Home
Position