AT&T E5828B - Manual (Page 38)

35
Caller ID operation
Caller ID memory
• Press SELECT/
TRANSFER
on the cordless hand-
set or SELECT on the telephone base to edit
the telephone number. You can make any
changes to the number by using the
CID then
INTERCOM
/CID DEL on the telephone base and
INT/
DELETE on the cordless handset to erase
characters, or using the dial pad to enter new
ones (see pages 26-27 for instructions).
• To choose to assign a distinctive ring to an
entry, press SELECT/
TRANSFER
on the cordless
handset or SELECT on the telephone base.
Press CID or DIR to choose Y (for yes) or
N (for no). If you choose yes (and if you have
caller ID service), a different ringing style will
alert you when this person calls (This step is for
the cordless handset only).
• Press SELECT/
TRANSFER
on the cordless hand-
set or SELECT on the telephone base again and a
long beep will sound signal that the information
has been stored in the directory.
Deleting a number from the call summary
• Press
CID on the telephone base or on the
cordless handset to activate the call summary.
• Press CID or DIR on the telephone base or
on the cordless handset to scroll to the incom-
ing call entry to be deleted.
• When the desired record is displayed on the
screen, press
INTERCOM
/CID DEL on the tele-
phone base (
INT/
DELETE on the cordless hand-
set) to delete the entry.
NOTES:
1. Deleting an incoming call record on the telephone base does
not automatically delete the same record from the cordless
handset. Likewise, deleting an incoming call record on the
cordless handset does not automatically delete the same
record from the telephone base.
2. When an entry is deleted, the next oldest record is displayed.
3. See page 34 for instructions on dialing a call summary entry.