Panasonic KXTG7732 - Manual (Page 51)

– The message indicator on the handset
flashes slowly if the message alert feature
is turned on (page 53).
1 To listen to new messages:
M MENU N#323
To listen to all messages:
M MENU N#324
2 When finished, press M OFF N .
Note:
R To switch to the receiver, press M N .
Operating the answering system
M MENU N a MbN : “ Answering device ” a
M SELECT N
Key Operation
MjN or MkN Adjust the receiver/speaker
volume
(during playback)
1 or MFN Repeat message
(during playback)
*1
2 or MEN Skip message
(during playback)
3 Enter the “ Settings ” menu
4 Play new messages
5 Play all messages
6 Play greeting message
76 Record greeting message
8 Turn answering system on
M PAUSE N Pause message *2
9 or
M STOP N
Stop recording
Stop playback
0 Turn answering system off
*4 *3 Erase currently playing
message
*5 Erase all messages
*6 Reset to a pre-recorded
greeting message
*1 If pressed within the first 5 seconds of a
message, the previous message is
played.
*2 To resume playback:
MbN : “ Playback ” a M SELECT N
*3 You can also erase as follows:
M ERASE N a MbN : “ Yes ” a M SELECT N
Calling back (Caller ID
subscribers only)
If caller information is received for the call, you
can call the caller back while listening to a
message.
1
Press M PAUSE N during playback.
2 MbN : “ Call back ” a M SELECT N
Editing the number before calling back
1
Press M PAUSE N during playback.
2
MbN : “ Edit & Call ” a M SELECT N
3
Press M EDIT N repeatedly until the phone
number is shown in the desired format
(page 44).
a M N
R To call back using a cellular line,
continue from step 2, “Making cellular
calls”, page 22.
Erasing all messages
1
M MENU N#325
2
MbN : “ Yes ” a M SELECT N a M OFF N
Remote operation
Using a touch-tone phone, you can call your
phone number from outside and access the
unit to listen to messages or change
answering system settings. The unit’s voice
guidance prompts you to press certain dial
keys to perform different operations.
Remote access code
A 3-digit remote access code must be entered
when operating the answering system
remotely. This code prevents unauthorized
parties from listening to your messages
remotely. The default setting is
“ 111 ” .
For assistance, please visit http://www.panasonic.com/help 51
Answering System for Landline