Making/answering calls using the base unit, Making cellular calls, Making landline calls – Panasonic KXTG7732 User Manual
Page 27: Answering calls
Making cellular calls
Available for:
KX-TG7741 series (page 3)
1
Press
M
CELL 1
N
or
M
CELL 2
N
.
2
Dial the phone number.
3
When the other party answers, speak into
the microphone.
R
Speak alternately with the other party.
4
When you finish talking, press
M
SP-PHONE
N
.
Note:
R
For best performance, use the
speakerphone in a quiet environment.
R
While on a call, you can switch from the
base unit to the handset:
With the call sharing mode on (page 29),
press
M
CELL
N
on the handset.
a
MbN
:
Select the desired cellular phone.
a
M
SELECT
N
a
Press
M
SP-PHONE
N
on the
base unit.
– When only 1 cellular phone is registered
or the line is set to make cellular calls
(page 20), press
M
CELL
N
on the
handset, then press
M
SP-PHONE
N
on
the base unit.
If the handset is on the base unit, simply lift
it.
Adjusting the speaker volume
Press
MjN
or
MkN
repeatedly while talking.
Redialing the last number dialed
1
Press
M
CELL 1
N
or
M
CELL 2
N
.
2
M
REDIAL
N
Making landline calls
1
M
SP-PHONE
N
2
Dial the phone number.
3
When the other party answers, speak into
the microphone.
4
When you finish talking, press
M
SP-PHONE
N
.
Note:
R
While on a call, you can switch from the
base unit to the handset:
Press
M
N
on the handset, then press
M
SP-PHONE
N
on the base unit with the call
sharing mode on (page 29).
If the handset is on the base unit, simply lift
it.
Redialing the last number dialed
M
SP-PHONE
N
a
M
REDIAL
N
Pause (for PBX/long distance service
users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 32).
Example:
If you need to dial the line access
number “9” when making outside calls with a
PBX:
1
M
SP-PHONE
N
2
9
a
M
PAUSE
N
3
Dial the phone number.
Note:
R
A 3.5 second pause is inserted each time
M
PAUSE
N
is pressed.
Answering calls
When a call is being received, the SP-PHONE
indicator flashes rapidly.
When a cellular call is being received, the
CELL 1 or CELL 2 indicator and SP-PHONE
indicator flash rapidly.
1
Press
M
SP-PHONE
N
when the unit rings.
R
You can also answer the cellular call
by pressing
M
CELL 1
N
or
M
CELL 2
N
.
2
Speak into the microphone.
3
When you finish talking, press
M
SP-PHONE
N
.
For assistance, please visit http://www.panasonic.com/help
27
Making/Answering Calls Using the Base Unit