Panasonic VDRD310EP - Manual (Page 14)

14
LSQT1140
Installation/Connection
∫ DVDfunSTUDIO
Select [start]
# [All Programs (Programs)] #
[Panasonic] # [DVDfunSTUDIO] #
[Operating instructions].
Follow the steps below to uninstall any software
applications that you no longer require.
1
Select [start] # ([Settings] #)
[Control Panel] #
[Add or Remove Programs
(Applications)].
2
Select the software application to
be deleted, then click [Change/
Remove] ([Change or Remove] or
[Add/Remove]).
≥ Proceed with the uninstallation by following the
on-screen instructions.
≥ After uninstalling the software, be sure to
reboot the computer.
Connection and
recognition
After the driver and software applications are
installed, the unit must be connected to the
computer and be correctly recognized by the
computer.
≥ Connect after installing the driver and software
applications.
≥ If the supplied CD-ROM is inserted in the
computer, remove it. (If the [Setup Menu] is
running, wait until it finishes, then remove the
CD-ROM.)
≥ If the recognition procedure is not
accomplished properly, operation will not be
possible after connecting the unit to the
computer.
≥ If the unit fails to operate normally, it may mean
that you have not conducted the installation or
recognition procedure properly.
≥ Be sure to finalize DVD-RW (VR format),
DVD-RW (Video format) and DVD-R on this
unit, before using them on the computer.
Un-finalized discs will not be recognized by
the computer.
¬Connect this unit to the AC adaptor.
1
Insert a disc or card with
recorded images in the unit, then
turn on the unit.
Software application
uninstallation
Connection and recognition
procedures
LSQT1140_EN.book 14 ページ ２００６年１２月７日 木曜日 午後７時４５分