Starting/stopping the unit – American Standard TRACER CH532 User Manual

Page 9

CG-SVU01B-E4

Starting/stopping the unit

Once the unit is powered on (main
disconnect switch closed) TRACER
CH532 returns to the following
display:

Line 2 gives current date and time
Line 3 gives current leaving water
temperature
Line 4 gives the unit status:

OFF BY KEYB = Local stop
UNIT ON = Unit running

Pressing

from any screen will

return to this screen.

1. Starting the unit:

1. Press
2. Following screen will be displayed:

3. Press

4. Press or to

change

from

“N” to “Y”

5. Press

. Following screen will

be displayed:

2. Stopping the unit

1. Press

to exit from any menu

and return to default display.

2. Press

for 3 seconds unit will

stop, and following screen will be
displayed:

3. Press

to return to default

display

Esc

Note: In case of power failure unit
will restart in the state (operating
mode, setpoints…) it was in before
the power failure and default screen
will be displayed.

TRACER CH532

V2.0

01/05/04

00:00

Water Temp

20.0°C

OFF BY KEYB.

Status Unit
OFF BY KEYB.

Switch on unit ?