American Standard TRACER CH532 - Manual (Page 10)

10 CG-SVU01B-E4
Menus
TRACER CH532 allows the user to
access 4 menus to display or adjust
operation parameters:
• “Data display” menu - This menu
allows the user to visualize all
operation parameters:
- Water and air temperatures
- Refrigerant pressures
- Saturated refrigerant
temperatures
- Compressors status
- Compressor running hours
- Number of compressors starts
- Unit operating mode
- Compressors failures counters
• “Settings” menu - This menu is
password protected. It allows
access to the settings of:
- Setpoints
- Offset of cooling and heating
setpoints
- Unit operation validation
- Customer inputs and outputs
• “Clock” menu - This menu is
password protected. It allows
access to the settings of:
- Day of the week, hour, date
- Daily or weekly program
- Hourly zone program
• “Configuration” menu - This menu
is password protected. It allows to
adjust or change:
- Unit definition
- Compressors timers
- High pressure control
- Dead band, antifreeze and heater
setpoints
- Type of sensors and transducers
- Operation protections
- Cooling mode limitations
- Defrost parameters
- Compressor alarms
Accessing the menus
From any screen displayed, press
, TRACER CH532 will then
display the following screen:
1. or allow the cursor to
move from line to line thus
selecting one of the 4 menus.
Note: The selection is displayed in
capital characters
2. Once one line is selected,
press to validate the choice.
3. Pressing will exit the menu
selection mode and return to
default display.
Esc
Esc
Data Display
Settings
Clock
Configuration