Panasonic KXTGA815FX - Manual (Page 5)

5
Battery installation/Battery charging
(page 2: 2)
Important:
• Use the supplied rechargeable batteries. For replacement, we recommend
using the Panasonic rechargeable batteries noted in the base unit’s operating
instructions.
• Wipe the battery ends ( S , T ) with a dry cloth.
• Avoid touching the battery ends ( S , T ) or the unit contacts.
• Confirm correct polarities ( S , T ).
• USE ONLY Ni-MH batteries AAA (R03) size.
• Do NOT use Alkaline/Manganese/Ni-Cd batteries.
Place the handset on the charger for about 7 hours before initial use.
Note:
• The handset display may show “Please wait for 1 minute.” when the
handset is placed on the charger if it is not registered to the base unit.
• If the batteries are fully charged, but the operating time seems to be shorter,
clean the battery ends ( S , T ) and the charge contacts with a dry cloth and
charge again.
Display language
16 display languages are available.
1
K /1 (middle soft key) (11)
2
{ r} : Select your desired language. s M s {ic}
When the language selection is displayed after installing the batteries for the
first time, you can select your desired language.
{
r} : Select your desired language. s M s {ic}
You can select “ ”, “ ”, “ ”, “ ”,
“ ”, “ ”, “ ”, “ ”, “ ”,
“ ”, “ ”, “ ”, “ ”, “ ”,
“ ”, or “ ”.
TGA671FX(fx).book Page 5 Saturday, February 18, 2012 1:14 PM