3 trusted computing, 4 mps configuration, Trusted computing -18 – Asus RS100-E5-PI2 User Manual
Page 80: Mps configuration -18, 3 trusted computing 5.4.4 mps configuration, Tcg/tpm support [no, Mps revision [1.4, Flow control [none, Redirection after bios post [always, Terminal type [ansi
5-18
Chapter 5: BIOS setup
TCG/TPM SUPPORT [No]
Allows you to set the TCG/TPM SUPPORT.
Configuration options: [No] [Yes]
5.4.3
Trusted Computing
5.4.4
MPS Configuration
MPS Revision [1.4]
Allows you to select the MPS revision.
Configuration options: [1.1] [1.4]
Flow Control [None]
Allows you to set the flow control for console redirection.
Configuration options: [None] [Hardware] [Software]
Redirection After BIOS POST [Always]
Sets the redirection mode after the BIOS Power-On Self-Test (POST). Some
operating systems may not work when this item is set to Always.
Configuration options: [Disabled] [Boot Loader] [Always]
Terminal Type [ANSI]
Allows you to select the target terminal type.
Configuration options: [ANSI] [VT100] [VT-UTF8]
VT-UTF8 Combo Key Support [Enabled]
Allows you to enable or disable VT-UTF8 Combination Key Support for ANSI/
VT100 terminals.
Configuration options: [Enabled] [Disabled]
Enable/Disable TPM
TCG (TPM 1.1/1.2) supp
in BIOS
Trusted Computing
TCG/TPM SUPPORT
[No]
BIOS SETUP UTILITY
Advanced
BIOS SETUP UTILITY
Advanced
Select MPS
Revision.
MPS Configuration
MPS Revision
[1.4]