Asus A8V - Manual (Page 88)

4-32 Chapter 4: BIOS Setup
4.5.6 Hardware Monitor
Hardware Monitor
CPU Temperature [48ºC/118ºF]
MB Temperature [35ºC/95ºF]
Power Temperature [57ºC/134.5ºF]
CPU Fan Speed [3260RPM]
Chassis Fan Speed [N/A]
Power Fan Speed [N/A]
CPU Q-Fan Control [Disabled]
VCORE Voltage [ 1.504V]
3.3V Voltage [ 3.360V]
5V Voltage [ 5.160V]
12V Voltage [11.328V]
CPU Temperature
CPU Temperature [xxx ºC/xxx ºF]
MB Temperature [xxx ºC/xxx ºF]
Power Temperature [xxx ºC/xxx ºF]
The onboard hardware monitor automatically detects and displays the
CPU, motherboard and power temperatures. Select Disabled if you do not
wish to display the detected temperatures.
CPU Fan Speed [xxxxRPM] or [N/A]
Chassis Fan Speed [xxxxRPM] or [N/A]
Power Fan Speed [xxxxRPM] or [N/A]
The onboard hardware monitor automatically detects and displays the
CPU, chassis, and power fan speeds in rotations per minute (RPM). If any
of the fans is not connected to the motherboard, the specific field shows
N/A.
CPU Q-Fan Control [Disabled]
Allows you to enable or disable the Chassis fan control function. When this
field is set to [Enabled], the item CPU Fan Ratio appears.
Configuration options: [Disabled] [Enabled]
CPU Fan Ratio [11/16]
Allows you to select the fan speed ratio. This item appears only if the
CPU Q-Fan Control item is Enabled.
Configuration options: [11/16] [12/16] [13/16] [14/16] [15/16]
VCORE Voltage, +3.3V Voltage, +5V Voltage, +12V Voltage
The onboard hardware monitor automatically detects the voltage output
through the onboard voltage regulators.