Asus A8V - Manual (Page 114)

5-16 Chapter 5: Software support
8. If you select the utility will duplicate your data. Press anytime
if you want to exit the duplication process.
3. From this point, you can auto-configure the RAID array by selecting
Auto Setup for Data Security or manually configure the RAID array
for mirrored sets. If you want to auto-configure, proceed to the next
step, otherwise, skip to step 6.
4. Select Auto Setup for Data Security and press . The
following confirmation message appears.
The data on the selected disks will
be destroyed. Continue? (Y/N)
10. Press to confirm or to return to the configuration options.
11. Press to go back to main menu.
Auto create array will destroy all
data on disks, Continue? (Y/N)
5. Press to confirm or to return to the configuration options. If
you selected , proceed to step 11.
6. Select Select Disk Drives, then press . Use arrow keys to
select disk drive/s, then press . An asterisk appears before a
selected drive.
7. Select Start Create Process and press to setup hard disk for
RAID system. The following inquiry appears:
Save the data on source disk to
mirror after creation? (Y/N)
Duplicating...
RAID 1 for data protection
Press Yes(Y) to Escape
9. If you select , the following confirmation message appears.