Alamo A84B - Manual (Page 81)

ASSEMBLY
A84B 03/07 Assembly Section 3-3
© 2007 Alamo Group Inc.
ASSEMBL
Y
OPTIONAL A-FRAME ASSEMBLY (Figure Asm-R-0124)
1. Insert bushing (5) into lower end of each A-Frame half (1 & 2). Position each A-Frame half so the large
hole in the top is towards the tractor. Install 3/4 x 2" bolt (10) with Flatwasher (14) through bushing (5) in A-
Frame half (1 & 2) and rear hole in inside Main Frame lug. Install locknut.
2. Install bushing (8) between braces (3) through top rear hole of A-frame and insert bolt (12), flatwasher (14)
and locknut (13).
3. Install bushing (22) between A-Frame halves (1 & 2) and insert bolt (23) and locknut (13). Install bushings
(6) through Braces (4) and install bolt 3/4 x 5 (10), flatwashers (14) and locknut (13).
4. Attach Braces (3) to Braces (4) with bushings (6), bolt 3/4 x 2-1/2 (16), and locknut (13). Retain the rear of
Braces (3) together with bushing (15), bolt 3/4 x 2-1/2 (11) and locknut (13). Attach braces (4) together
with bolt 3/4 x 1-1/2 (17) and locknut (13).
5. Install Brace supports (4) to the rear lugs on the Main Frame with bolts 3/4 x 2 (10), flatwashers (14),
bushings (6) and locknuts (13).