Or raise mower. use protective device, Springs weak. replace springs, Improper adjustment. re-adjust slip clutch – Alamo A84B User Manual

Page 135: Too much power for reduce ground speed and, Slip clutch. material intake, Friction facings worn. replace facings, Oil on facings. replace facings, Friction facings glazed. clean with emery cloth, Approximately 5/8, Oil level too high. lower oil level to plug

OPERATION

A84B 03/07

Operation Section 4-45

OPERA

ION

SHAFT OR TUBE TWISTED

Over-loaded.

Replace part and then slow down or

or raise Mower. Use protective device.

TUBE BROKEN IN WELDED

Over-loaded.

Replace part.

SEAM

YOKE BROKEN AT

Over-loaded.

Replace part.

EAR TIP

SLIP CLUTCH SLIPPING

Excessive load.

Reduce speed and/or raise cutter.

EXCESSIVELY

Springs weak.

Replace Springs.

Improper adjustment.

Re-adjust Slip Clutch

Too much power for

Reduce ground speed and

Slip Clutch.

material intake.

Friction Facings worn.

Replace Facings.

Oil on Facings.

Replace Facings.

Friction Facings glazed.

Clean with emery cloth.

OIL BLOWING OUT

Flat bottomed Vent Plug

Replace with proper Vent Plug.

VENT PLUG

or shallow cavity Plug.

Cavity in Oil Plug should be

approximately 5/8".

Oil level too high.

Lower oil level to Plug.

DRIVELINE INTEGRAL

Integral Shields deformed.

Replace Shield.

SHIELDS RATTLING OR
NOT TURNING FREELY

Nylon Bearing worn.

Replace Nylon Bearing.