beautypg.com

Connecting to pc, System connections – Audiovox FPE2706DV User Manual

Page 20

background image

System Connections

Connecting to PC

The unit can be connected to a PC (personal computer) via a VGA cable. Follow the instructions and
figure below to connect to a PC:
1. Connect one end of the VGA cable to the VGA input connector on the right side of the unit’s rear
panel.
2. Connect the other end to the PC VGA output connector.
3. Connect one end of the audio cable to the PC audio input jacks on the right side of the unit’s rear
panel.
4. Connect the other end to the PC audio output jack.
5. Set the PC’s resolution at 1024×768; and the refresh frequency must be set at 60Hz.
After connecting, press the Input button and select VGA mode.





























- 19 -

See also other documents in the category Audiovox DVD-players: