Sony PCG-SR33K - Manual (Page 93)

Connecting to a Local Area Network
You can connect your notebook to 10BASE-T and 100BASE-TX-type Local Area Networks (LANs). Use a PC Card to
connect the notebook to a network. See
Using PC Cards for information. For detailed settings and more information
on devices needed to connect to the network, consult your network administrator.
Connecting to LAN
Warning: Only connect 10BASE-T and 100BASE-TX cables to the Ethernet port. Do not connect any other type
of network or phone cable. Connecting cables other than those listed abov e may result in an electric current ov erload
and could cause a malfunction, excessiv e heat, or fire in the port. To connect the unit to the network, contact your
network administrator.
To set up your Ethernet connection
1. Click Start on the Windows ® taskbar, select My Computer, and right-click My Network Places. The Network
and Dial-up Connections dialog box displays.
2. Click Make a New Connection. The Network Connection Wizard displays.
3. Follow the step-by-step instructions that appear on the screen.
4. Enter the necessary setting(s) provided by your network administrator.
To set network components
1. Right-click My Network Places and select Properties. The Network dialog box displays.
2. Click Add to add or remove network components.
3. Follow the step-by-step installation instructions that appear on the screen.
Page 93