beautypg.com

Receiving a call, Help guide, Search – Sony SRS-BTV5 User Manual

Page 38

background image

Help Guide

SRS-BTV5

Top

>

Phone calls

>

Phone calls

>

Getting Started

BLUETOOTH

One touch connection (NFC)

Music

Phone calls

Troubleshooting

Important information

Contents list

Receiving a call

When an incoming call arrives, a ring tone will be heard via the system.

The ring tone differs in the following ways, depending on your smartphone or mobile phone.

ring tone set on the system

ring tone set on the smartphone or mobile phone

ring tone set on the smartphone or mobile phone only for a BLUETOOTH connection

1. Connect the system with a BLUETOOTH device.
2. Press the

button on the system.

Note

If you received a call using your smartphone or mobile phone, some smartphones or

mobile phones may have handset use priority. In the case of the HFP connection, talk

on the system by pressing the

button on the system for about 2 seconds, or using

your smartphone or mobile phone. For details, refer to the manual supplied with your

smartphone or mobile phone.

To adjust the volume
Press the VOL +/– button.

The system beeps when set to the lowest (0) or highest volume level.

Tips

You cannot adjust the volume when not talking.

If the caller cannot or can barely hear your voice, talk into the microphone of the system.

To end a call
Press the

button on the headset.

To turn off the system

1. Disconnect the BLUETOOTH connection using the smartphone or mobile phone.
2. Slide the POWER switch of the system to turn it off.

The (BLUETOOTH) indicator (blue) goes off.

© 2012 Sony Corporation

38

Search

Search