Sony SRS-BTV5 - Manual (Page 30)

Help Guide
SRS-BTV5 Top > One touch connection (NFC) > One touch connection >
Getting Started
BLUETOOTH
One touch connection (NFC)
Music
Phone calls
Troubleshooting
Important information
Contents list
Connecting with the smartphone by one touch
By touching the system with the smartphone, the system is turned on automatically and then
proceeds to pairing and BLUETOOTH connection.
1. Set the switch to the center on the system.
You do not need to turn on the system. The system turns on when you touch it with the
smartphone.
2. Touch the system with the smartphone.
Unlock the screen of the smartphone beforehand.
Touch the smartphone on the N marked part of the system.
Touch the system with the smartphone until they are connected.
When the (BLUETOOTH) indicator (blue) stops flashing and remains lit, the system
is connected with the device.
Refer to the manual of the smartphone for the designated location to be touched on
the smartphone.
Tip
When the switch is set to NFC OFF, you cannot make a connection. You may set the
switch to NFC OFF to prevent the system from turning on or connecting with other
devices if you touch the system with other device unintentionally. However, if you set the
switch to NFC OFF when the system is connected with another device, you can
disconnect the system from the device by touching the system with the device.
30
Search Search