Manual ip configuration – Accton Technology CheetahAccess Wireless Gateway AC-IG2004W User Manual
Page 46
Configuring Client TCP/IP
5-4
Manual IP Configuration
1.
Select “Specify an IP address” in the “IP Address” tab. Select an IP address
based on the default network 192.168.2.X (where X is between 1 and 254), and
use 255.255.255.0 for the subnet mask.
2.
In the “Gateway” tab, add the IP address of the CheetahAccess Wireless
Gateway (default: 192.168.2.1) in the “New gateway” field and click “Add.”
3.
In the “DNS Configuration” tab, add the IP address for the CheetahAccess Wireless
Gateway and click “Add.” This automatically relays DNS requests to the DNS
server(s) provided by your ISP. Otherwise, add specific DNS servers into the
“DNS Server Search Order” field and click “Add.”
4.
After finishing TCP/IP setup, click “OK,” and then reboot the computer. After
that, set up other PCs on the LAN according to the procedures described
above.