Accton Technology CheetahAccess Wireless Gateway AC-IG2004W - Manual (Page 44)

Configuring Client TCP/IP
5-2
5. Select the “Microsoft” item in the manufacturers list. And choose “TCP/IP” in the
Network Protocols. Click the “OK” button to return to the Network window.
6. The TCP/IP protocol will be listed in the Network window. Click “OK” to
complete the install procedure and restart your PC to enable the TCP/IP
protocol.
Setting TCP/IP to Work with the CheetahAccess ™ Wireless
Gateway
1. Click the “Start” button and choose “Settings,” then click “Control Panel.”
2. Double click the “Network” icon. Select the TCP/IP line that has been assigned
to your network card in the “Configuration” tab of the Network window.
3. Click the “Properties” button to set the TCP/IP protocol for the CheetahAccess
Wireless Gateway.