Accton Technology CheetahAccess Wireless Gateway AC-IG2004W - Manual (Page 31)

Networking and Client Services
4-9
Check if you only use a dial-up modem to connect to the Internet. – If the serial port
is used for primary Internet access, then mark this item.
- Auto Backup – Click on “Enabled” for automatically dialing up when the primary
WAN link fails.
Note: If not marked, then this connection will only be used for backup access if the
primary WAN link fails.
Dial-Up Service Phone Number – Enter the phone number your service provider has
given to you for Internet access.
Dial-Up Account Information – Enter your ISP account user name and password.
Has your Internet Service Provider given you an IP address? – If you are assigned a
dynamic IP address every time you dial up, mark “No” for this item. However, if your
ISP has assigned a fixed IP address for you to use, mark “Yes” for this item and
enter the IP address and subnet mask.
Note: If your ISP has given you a secondary phone number, or if you have a secondary
Internet service account, then fill in the relevant fields under “Secondary Dial-up.”
DNS Configuration
Domain Name Servers are used to map an IP address to the equivalent domain
name (e.g., www.accton.com). Your ISP should provide the IP address for one or
more domain name servers. Enter those addresses on this screen.