Sony LBT-SH2000 - Manual (Page 31)

model name [LBT-SH2000]
[4-273-674-81(1)] US
31 US
filename[D:\NORM'S JOB\SONY HA\SO120012\LBT-
SH2000\4273674811_US\US080ADD.fm] masterpage:Right
Ad
di
ti
o
n
a
l I
n
fo
rm
at
io
n
USB device
DATA ERROR
You tried to play back a file that is not
playable.
DEVICE ERROR
The USB device could not be recognized
or an unknown device is connected.
DEVICE FULL
The memory of the USB device is full.
FATAL ERROR
The USB device was removed during
transferring or erase operation, and may
have been damaged.
FOLDER FULL
The number of folders has reached the
maximum.
NO DEVICE
No USB device is connected.
NO MEMORY
The memory selected for playback or
transfer has no memory media inserted in
the USB device.
NO STEP
All of the programmed steps have been
erased.
NO TRACK
No playable file is inserted in the system.
NOT IN USE
You tried to perform a specific operation
under conditions where that operation is
prohibited.
NOT SUPPORTED
An unsupported USB device is connected,
or the USB device is connected through
an USB hub.
PROTECTED
The USB device is write-protected.
PUSH STOP
You tried to perform an operation that can
be performed only when the playback is
stopped.
READING
The system is reading information of the
USB device. Some buttons are not
available.
REC ERROR
Transferring did not start, stopped
partway, or otherwise could not be
performed.
STEP FULL
You tried to program more than 25 steps.
TRACK FULL
The number of files has reached the
maximum.
Precautions
When carrying the unit
Perform the following procedure to
protect the disc mechanism.
Use the buttons on the unit to perform this
operation.
1 Press "/1 to turn on the system.
2 Press CD.
3 Remove the disc.
Press Z EJECT to remove the disc.
Wait until “CD NO DISC” appears in
the display panel.
4 Hold down CD and follow by "/1 for
about 3 seconds. Then, “MECHA
LOCK” appears in the display
panel.
5 Unplug the power cord.
Notes on discs
• Before playing, wipe the disc with a cleaning
cloth from the center out to the edge.
• Do not clean discs with solvents, such as
benzine thinner, or commercially available
cleaners or anti-static spray intended for vinyl
LPs.
• Do not expose discs to direct sunlight or heat
sources such as hot air ducts, nor leave it in a
car parked in direct sunlight.
Continued
l