Sony MHC-EC619IP - Manual (Page 16)

16
GB
MHC-EC619iP.4-467-785-22(1)
USB Device
Before using the USB
device
Check the information on websites
for compatible USB devices using the
URLs listed under “USB devices” in
“Compatible devices with this system”
(page 23). For details on how to
use the USB device, refer to the user’s
guide supplied with your USB device.
Notes
 When USB cable connection is necessary,
connect the USB cable supplied with
the USB device to be connected. See the
operation manual supplied with the USB
device to be connected for details on the
operation method.
 It may take a long time before “SEARCH”
appears depending on the type of USB
device connected.
 Do not connect the system and the USB
device through a USB hub.
 When the USB device is inserted, the
system reads all the files on the USB
device. If there are many folders or files on
the USB device, it may take a long time to
finish reading the USB device.
 With some connected USB devices, after
an operation is performed, there may
be a delay before it is performed by this
system.
 Compatibility with all encoding/writing
software cannot be guaranteed. If audio
files on the USB device were originally
encoded with incompatible software,
those files may produce noise or
interrupted audio, or may not play at all.
 This system does not necessarily support
all the functions provided in a connected
USB device.
 Do not remove the USB device during
transferring or erase operations. Doing
so may corrupt the data on the device or
damage the device itself.
To use the system as a battery
charger
You can use the system as a battery
charger for USB devices that have
a rechargeable function when the
system is on.
1
Select the USB function.
Press USB.
2 Connect the USB device to the
(USB) port.
The charging begins when the USB
device is connected to the (USB)
port. For details, see the user’s
guide of your USB device.