Sony RDR-VX560 - Manual (Page 67)

D
V
D E
d
it
in
g
67 US
6
Select “Finalize,” and press ENTER.
The display asks for confirmation again.
7
Select “OK,” and press ENTER.
The recorder starts finalizing the disc.
To turn off the display
Press SYSTEM MENU.
To unfinalize a DVD-RW
If you cannot record or edit on a DVD-RW that has
been finalized, unfinalize the disc by selecting
“Unfinalize” in step 6 above.
z Hints
• You can check whether the disc has been finalized or
not. If you cannot select “Finalize” in step 6 above, the
disc has already been finalized.
• To check the disc information, select “Disc
Information” in the “Disc Setting” display and press
ENTER. See page 64 for details.
Notes
• Depending on the condition of the disc, the recording,
or the DVD equipment, discs may not play even if the
discs are finalized.
• The recorder may not be able to finalize a disc if it was
recorded on another recorder.
Using the Auto Finalize function
If the recording exceeds 30 % of the disc capacity,
the recorder automatically finalizes DVD-RWs
(Video mode), DVD-Rs (Video mode), and
DVD+Rs:
– when you eject the disc by pressing Z OPEN/
CLOSE immediately after you stop recording by
pressing x STOP.
– when all the timer recordings are finished.
– if the disc becomes full during recording.
To turn on this function, set “Auto Finalize” to
“On” in the “Features” setup (page 103).
Notes
• It may take a few minutes for the recorder to finalize a
disc.
• A disc once finalized cannot be recorded or edited.
• DVD-Rs (Vidoe mode)/DVD+Rs cannot be
unfinalized.
• For discs where erasing titles/chapters does not free up
disc space (page 59), the Auto Finalize function
activates if the total amount of recording before erasing
exceeds 30 % of the disc capacity.
• The Auto Finalize function does not work for One-
touch Timer Recording (page 50) or Synchro-
Recording (page 54).
Disc will be finalized.
Do you want to continue ?
Cancel OK
-RW
Video
+ R -R
Video