Sony RDR-VX560 User Manual
Page 104
104
US
◆ Ch. Digit lock
Allows you to select whether to fix the digits for
your cable box or satellite receiver.
◆ Mode for SET button
Select “Mode 1” or “Mode 2” if your cable box or
satellite receiver requires pressing an ENTER
button or a SET button etc., after entering the
channel number. If “Mode 1” does not work, try
“Mode 2.” If your cable box or satellite receiver
does not respond to either setting, contact the
manufacturer of the cable box or satellite receiver.
Control for HDMI
Language Follow
Notes
• Turn off any display before turning on this function.
• The OSD language for the recorder keeps if the TV’s
language cannot be supported.
Language, Parental Control
Settings/Factory Settings
(Options)
The “Options” setup allows you to set up other
operational settings.
1
Press SYSTEM MENU while the recorder is
in stop mode.
2
Select “Setup,” and press ENTER.
3
Select “Options,” and press ENTER.
The “Options” setup appears with the
following options. The default settings are
underlined.
Language
◆ OSD (On-Screen Display)
Switches the display language on the screen.
◆ Disc Menu (DVD VIDEOs only)
Switches the language for the DVD menu.
◆ Audio (DVD VIDEOs only)
Switches the language of the soundtrack.
When you select “Original,” the language given
priority in the disc is selected.
◆ Subtitle (DVD VIDEOs only)
Switches the language of the subtitles recorded on
the disc.
When you select “Auto,” the subtitle language
changes according to the language you selected
for the soundtrack. See page 120 for an
explanation of the language abbreviations.
Note
If you select a language in “Disc Menu,” “Subtitle,” or
“Audio” that is not recorded on the DVD VIDEO, one of
the recorded languages will be automatically selected.
Off
Select this when your cable box or
satellite receiver only accepts a
three or more digit channel
number. Normally select this.
Lock to
2 digits
Select this only when your cable
box or satellite receiver only
accepts a two digit channel
number.
Off
No code is sent when SET is
pressed. Normally select this.
Mode 1
Sends the channel number you
entered.
Mode 2
Sends the channel number you
entered.
On
Allows you to use the Control for
HDMI function (page 16).
Off
Turns off the function.
On
Switches the language of this
recorder to the same as the
current TV’s OSD language. You
cannot select this when “Control
for HDMI” is set to “Off.”
Off
Turns off the function.
10:10 AM
Options
Setup
Disc Setting
Edit
Title List
Timer
Dubbing
Language
Parental
Front Display
Command Mode
Factory Setting
: Auto
: DVD 3