Sony PCV-E314DS - Manual (Page 90)

VAIO Digital Studio Reference Manual 82
I/O Device Configuration
Serial port A: [Auto]
Disabled
Enabled
Base I/O address * : [3F8]
2F8
3E8
2E8
Interrupt*: [IRQ 4]
IRQ 3
Serial port B: [Auto]
Disabled
Enabled
Base I/O address † : [3F8]
2F8
3E8
2E8
Interrupt*: [IRQ 4]
IRQ 3
Parallel port: [Auto]
Enabled
Disabled
Mode
‡
: [Bi-directional]
EPP
ECP
Output only
Base I/O address
**
: [378]
278
228
Interrupt**: [IRQ 7]
IRQ 5
Floppy disk controller: [Enabled]
Auto
Disabled
Base I/O address: [Primary]
Secondary
* This option appears only if the port is set to Enabled.
† This option appears only if the port is set to Enabled.
‡ This option appears only if the port is set to Auto or Enabled.
** This option appears only if the port is set to Enabled and Mode is not set to EPP.