Sony PCV-E314DS - Manual (Page 47)

Removing, Installing, and Replacing Components 39
Removing a Memory Module
You may need to remove a memory module if you change the memory
configuration or replace a bad module.
1 Remove the left side panel (see “Removing the Left Side Panel” on
page 24).
2
Remove the bottom panel (see “Removing the Bottom Panel” on
page 25).
3
Remove the front panel (see “Removing the Front Panel” on page 26).
4
Slide the diskette drive out approximately two inches (see
“Detaching the Diskette Drive” on page 41).
5
Remove any add-in cards (see “Removing an Add-in Card” on
page 31) and other components as needed to access the memory
modules.
6 Locate the memory module you wish to remove.
!
Before opening the system unit, save any open files, exit Windows, turn off
the power of the computer and all attached peripherals, and then unplug the
power cord.
KY0073.VSD