Sony DSC-RX100M3 - Manual (Page 36)

3. Select your desired geographic location, and then press .
4. Select a setting item using the up/down side of the control wheel or by turning the
control wheel, then press in the center.
5. Set [Daylight Savings] or [Daylight Svg.:], [Date/Time], and [Date Format:] using the
up/down/left/right sides, then press in the center.
Midnight is indicated as 12:00 AM, and noon as 12:00 PM.
6. Repeat steps 4 and 5 to set other items, then select [Enter] and press in the center.
To cancel the date and time setting procedure, press the MENU button.
Note
If the date and time setting is cancelled halfway, the setting screen for the date and time
appears every time you turn on the camera.
[17] How to Use Confirming the operation method Confirming the operation method
Using the control wheel
You can select setting items by turning or pressing the top/bottom/right/left side of the control
wheel. Your selection is determined when you press on the center of the control wheel.
The DISP (Display Setting), (Exposure Comp./Photo Creativity), / (Drive
Mode), (Flash Mode) functions are assigned to the top/bottom/left/right sides of the control
wheel. You can assign selected functions to the left/right sides of the control wheel or to the
in the center.