Setting the date and time [16, Setting the date and time – Sony DSC-RX100M3 User Manual

Page 35

How to remove the memory card

1. Open the memory card cover.

2. Make sure that the access lamp (A) is not lit.

3. Push in on the memory card once to remove it.

4. Close the memory card cover.

[16] How to Use

Preparing the camera

Setting the date and time

When you turn on the camera for the first time or after you have initialized the functions, the

setting screen for the date and time appears.

1. Set the power switch to ON to turn on the camera.

The setting screen for the date and time appears.

2. Check that [Enter] is selected on the screen, then press

on the control wheel.