Sony DSC-RX100M3 - Manual (Page 143)

[162] How to Use Changing settings Setup menu
Pwr Save Start Time
You can set the time by which the power goes off automatically.
1. MENU
→ (Setup) → [Pwr Save Start Time] → desired setting.
Menu item details
30 Min/5 Min/2 Min (default setting)/1 Min
Note
The power save function is not activated during playing back slideshow or recording
movies, or when connected to a computer.
[163] How to Use Changing settings Setup menu
PAL/NTSC Selector
Plays back movies recorded with the product on a PAL/NTSC system TV.
1. MENU
→
(Setup
) → [PAL/NTSC Selector] → [Enter]
Note
This function is provided with 1080 50i-compatible devices only. It is not provided with
1080 60i-compatible devices. The 1080 50i-compatible devices have a “50i” mark on the
bottom of the product.
If you insert a memory card that has previously been formatted with the PAL system, a
message telling you that you must re-format the card appears. When you record using the
NTSC system, re-format the memory card or use another memory card.
When the NTSC mode is selected, the “Running on NTSC.” message always appears on
the start-up screen each time you turn the product on.
[164] How to Use Changing settings Setup menu