Sony DSC-WX1 - Manual (Page 30)

30 GB
Selecting a flash mode
• [On] and [Slow Synchro] are not available when the camera is in Intelligent Auto Adjustment
mode.
• You cannot use the flash during burst or bracket shooting.
• Depending on the shooting conditions, the periphery of the image may become dark when the flash
operates.
Changing the screen display
1 Press (Flash) on the control
button, then select the desired
mode with b/B
t z.
(Auto): Flash automatically operates in
dark locations or when there is backlight.
(On): Flash always operates.
(Slow Synchro): Flash always operates. The shutter speed is slow in a dark
place to clearly shoot the background that is out of flash light.
(Off): Flash does not operate.
Notes
1 Press DISP (Screen Display
Settings) on the control button, then
select the desired mode with v/V.
(Bright + Image Only): Sets screen
brighter and displays only images.
(Bright + Histogram): Sets screen
brighter and displays a graph of the image brightness.
(Bright): Sets screen brighter and displays the information.
(Normal): Sets screen to standard brightness and displays the information.
z
Histogram and brightness settings
A histogram is a graph showing the brightness of an image. The graph display indicates a bright
image when skewed to the right side, and a dark image when skewed to the left side.
If you view images in bright outside light, adjust the screen brightness up. However, the battery
power may decrease faster under such condition.