Sony DVP-NS900V - Manual (Page 87)

S
e
tt
ings
a
nd Adjus
tme
nts
87
The following settings are stored in memory
by the Playback Memory function.
— ANGLE (page 64)*
— AUDIO (page 58)*
— BNR (page 66)
— BOOKMARK (page 53)
— DIGITAL VIDEO ENHANCER (page 70)
— SUBTITLE (page 65)*
— VIDEO EQUALIZER (page 67)
∗
DVD VIDEO only
Notes
•
The player can store the settings of up to 200 discs.
When you store the setting of disc number 201, the
first disc setting is canceled.
•
The Playback Memory function cannot be used for
DVD-RWs in VR mode.
•
During playback, do not turn off the player by
pressing POWER on the player. Doing so may
cancel the settings. When you turn off the player,
press x first to stop playback and then press [
/ 1 on
the remote. After the power indicator lights up in red
and the player enters standby mode, press POWER
on the player.
x TRACK SELECTION (DVD VIDEO
only)
Gives the sound track which contains the
highest number of channels priority when
you play a DVD VIDEO on which multiple
audio formats (PCM, DTS, or Dolby Digital
format) are recorded.
Notes
•
When you set the item to “AUTO,” the language
may change. The “TRACK SELECTION” setting
has higher priority than the “AUDIO” settings in
“LANGUAGE SETUP” (page 81).
•
If PCM, DTS, and Dolby Digital sound tracks have
the same number of channels, the player selects
PCM, DTS, and Dolby Digital sound tracks in this
order.
x BOOKMARK RESET t
Resets the bookmarks. Select this and press
ENTER. The “BOOKMARK RESET”
display appears. Press ENTER again to erase
all of the bookmarks in all of the discs.
x CD DIRECT
Eliminates the use of unnecessary circuits
when playing CDs. This setting will be
activated when you open or close the disc
tray.
This function affects the output of the
following jacks:
— AUDIO OUT L/R 1/2 jacks
— 5.1CH OUTPUT jacks
— PHONES jack
Note
If you select “ON” when playing CD type DTS discs,
the sound will become noisy.
OFF No priority given.
AUTO Priority given.
OFF Select this when playing CD discs,
including CD type DTS discs.
ON Eliminates the use of unnecessary
circuits needed to play CDs.