Hook ups, Ql press enter, W; press x / x to select the item. wa press enter – Sony DVP-NS900V User Manual
Page 35: Enjoying the surround sound effects
Hook
ups
35
ql
Press ENTER.
The Setup Display for selecting whether or not you have connected a subwoofer appears.
w;
Press X/x to select the item.
wa
Press ENTER.
Quick Setup is finished. All connections and setup operations are complete.
Note
You can directly start Quick Setup only when you run it for the first time.
To run Quick Setup a second time, select “QUICK” under “SETUP” in the Control Menu (page 80).
To enjoy the surround sound effects of this player or your amplifier (receiver), the following
items must be set as described below for the audio connection you selected in pages 25 to 29
(
through
). Each of these are the default settings and do not need to be adjusted when
you first connect the player. Refer to page 80 for using the Setup Display.
Audio Connection (pages 25 to 29)
No additional settings are needed.
•
If the sound distorts even when the volume is turned down, set “AUDIO ATT” to “ON” (page 88).
•
Set “48kHz/96kHz PCM” to “96kHz/24bit,” only if you connect an amplifier (receiver) that
conforms to 96 kHz digital audio input (page 89).
Enjoying the surround sound effects
Item
You select
Page
DISTANCE
BALANCE
LEVEL
Set according to the connected
speakers
Item
You select
Page
DOWNMIX
DOLBY SURROUND
DIGITAL OUT
ON
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL:
OFF
TEST TONE:
FRONT:
CENTER:
LARGE
LARGE
REAR:
SUBWOOFER:
To set, press , then .
To quit press
ENTER
SETUP
DISPLAY
NONE
NONE
YES
LARGE(REAR)
B
D
A
B-1
B-2
C-2
D-2
continued