Sony DVP-NS900V User Manual

Page 79

Us
ing Va

ous

Addition

l Func

tions

Controlling the TV

When you set the TV/DVD switch to TV, you
can control the following items with the
supplied remote.

Slide the TV/DVD switch to DVD.

While holding down [/1, press down on
the scroll key.
“AV P-90” appears in the LCD screen.

Release [/1.

Toggle the scroll key up or down to
select your AV amplifier (receiver’s)
manufacturer’s code (see the table
below).

Press down on the scroll key.
The manufacturer’s code flashes and the
remote is set.

Code numbers of controllable AV

amplifiers (receivers)

If more than one code number is listed, try
entering them one at a time until you find the
one that works with your AV amplifier
(receiver).
If you do not connect an AV amplifier
(receiver), you can control your TV’s volume
by setting the code number to 90 (default).
However, you must first set the code number
of controllable TVs as explained above.

Controlling the AV amplifiers

(receivers)

When you set the TV/DVD switch to DVD,
you can control the volume of the AV
amplifier (receiver) using VOL

+/–

By pressing

You can

[/1

Turn the TV on or off

VOL +/–

Adjust the volume of the TV

WIDE MODE

Switch to or from the wide
mode of a Sony wide TV

TV/VIDEO

Switch the TV’s input source
between the TV and other input
sources

CH +/–, number
buttons, and
ENTER

Select the channel of the TV

Controlling the volume of your AV
amplifier (receiver) with the remote

[/1

VOL +/–

TV/DVD
switch

LCD screen

Scroll key

Manufacturer

Code number

Sony

80, 88, 89, 91

Denon

84, 85, 86

Kenwood

92, 93

Onkyo

81, 82, 83

Pioneer

Sansui

Technics

97, 98

Yamaha

94, 95, 96