Sony PCM-D1 - Manual (Page 24)

Recording
To change sampling frequency, quantifying
bit number, or the memory and folder for a
recording, go to the menu display (page 34).
The default sampling frequency and
quantifying bit number are “44.10 kHz
16 bit.”
1
Position the recorder and the built-in
microphones referring to “Preparation
before recording” (page 22).
2
Set the MIC/LINE IN switch to the “MIC”
position.
3 Press the  REC button.
The recorder stands by for recording, and
the
 PAUSE indicator flashes.
4
Turn the REC LEVEL L/R dials to adjust
the recording levels of the right and left
channels, checking the level on the
display and the analog level meters.
To adjust the level of the right channel
only, pull out the outside (R side) dial
slightly and turn it.
Pull out the
outside (R side)
dial only.
Recording (continued)
Built-in microphones
 PAUSE button/
indicator
REC LEVEL L/R dials
VOLUME dial
MIC/LINE IN switch
Analog level meters
 REC button/
indicator
 PLAY button
 STOP button
Peak level lamps
24
PCM-D1. US. 2-664-971-11(1)