Sony DSC-V1 User Manual

Page 99

oub

hoot

Zoom does not work.

• The zoom magnification cannot be changed

while shooting movies (MPEG Movie).

• You cannot use the zoom while a wide end

conversion lens is mounted.

—

Smart zoom does not
function.

• You cannot use smart zoom while shooting

movies (MPEG Movie).

• [Smart Zoom] is set to [Off] in the SET UP

settings.

• The LCD screen is turned off.
• The image size is set to [5.0M] or [4.5M(3:2)].

—

p Set [Smart Zoom] to [On] (pages 39 and 115).

p Turn on the LCD screen (page 28).
p Set image size to other settings except [5.0M] and [4.5M(3:2)]

The image is too dark.

• You are shooting a subject with a light source

behind the subject.

• The brightness of the LCD screen is too low.

p Adjust the exposure (page 49).

p Adjust the brightness of the LCD screen (pages 39 and 117).

The image is too bright.

• You are shooting a spotlighted subject in a dark

location such as on a stage.

• The brightness of the LCD screen is too bright.

p Adjust the exposure (page 49).

p Adjust the brightness of the LCD screen (pages 39 and 117).

Vertical streaks appear
when you are shooting a
very bright subject.

• The smear phenomenon is occurring.

p This is not a malfunction.

Noise appears in the
image when you view the
LCD screen in a dark
place.

• The camera is functioning to increase the

visibility of the LCD screen by temporarily
brightening the image under conditions of low
illumination.

p There is no effect on the recorded image.

Symptom

Cause

Solution