Sony DSC-H1 User Manual
Page 86
86
•
You cannot use the flash when:
–
Multi Burst, Burst or Exposure Bracket mode is selected (page 34).
–
(Twilight mode) or (Candle mode) of the Scene mode, or
(movie) is selected (
t
step 5 in “Read This First”).
•
Set the flash to (Forced flash) (
t
step 5 in “Read This First”) to shoot still images when
(Landscape mode),
(High-speed shutter mode), or
(Beach mode) is selected as
the Scene mode.
The close-up (Macro) function does not work.
•
(Twilight mode),
(Landscape mode), or (Candle mode) is selected for the Scene
.
The date and time are recorded incorrectly.
•
Set the correct date and time (
t
step 2 in “Read This First”).
The F value and shutter speed flash when you press and hold the shutter
button halfway down.
•
The exposure is incorrect. Correct the exposure (page 31).
The image is too dark.
•
You are shooting a subject with a light source behind the subject. Select the metering mode
(page 38) or adjust the exposure (page 31).
•
The brightness of the screen is too low. Adjust the brightness of the LCD backlight or the EVF
backlight (page 59).
The image is too bright.
•
You are shooting a spotlighted subject in a dark location such as on a stage. Adjust the
exposure (page 31).
•
The brightness of the screen is too bright. Adjust the brightness of the LCD backlight or the
EVF backlight (page 59).
The image colors are not correct.
•
Picture Effect function is activated. Cancel the Picture Effect function (page 41).
Vertical streaks appear when you are shooting a very bright subject.
•
The smear phenomenon is occurring. This phenomenon is not a malfunction.
Noise appears in the image when you view the screen in a dark place.
•
The camera is attempting to increase the visibility of the screen by temporarily brightening
the image under conditions of low illumination. There is no effect on the recorded image.