Sony PCG-FR130 - Manual (Page 30)

7. From the Available wireless networks list, select the name of the network (access point) in which you want to
connect. If you do not see the network name, see
If the network does not appear in the Available wireless
networks list box.
8. If required, type the network key in the Network key box. (The key should be between 5 and 13 ASCII
characters or 10 to 26 hexadecimal characters.)
9. Retype the network key in the Confirm network key box.
10. Make sure Enable IEEE 802.1x authentication for this network is selected.
11. Click Connect.
If the network does not appear in the Available wireless networks list box
1. Click Advanced on the Wireless Network Connection dialog box. The Wireless Network Connection Properties
dialog box appears.
Wireless Network Connection Properties
2. Click Add in the Preferred networks box. The Wireless network properties dialog box appears.
Wireless Network Properties
Page 30