Sony GV-HD700 - Manual (Page 51)

51
Usi
n
g a “M
e
m
o
ry
S
tic
k Du
o”
One of the images stored on the
“Memory Stick Duo” will be displayed.
1
Select the image you want to print
using VOLUME/MEMORY (–/+).
2
Set the number of copies you
want to print if necessary.
If you do not want to set the number, go
to step 3 (the number will be
automatically set to 1).
1 Select [SET] t [COPIES], then press
EXEC.
2 Select the number using V/v, then press
EXEC.
You can set the number up to 20.
3 Select [ RETURN], then press
EXEC.
3
Set the printing date/time on the
image if necessary.
If you do not want to print the date/time,
go to step 4.
1 Select [SET] t [DATE/TIME] t
[DATE] or [DAY & TIME], then press
EXEC.
2 Select [ RETURN], then press
EXEC.
4
Select [EXEC] t [YES], then
press EXEC.
When printing is finished, [Printing...]
disappears and the image selection
screen appears again.
Press MENU when printing is
completed.
b Notes
• We can guarantee the operation of only models
that are PictBridge compatible.
• Refer also to the operating instructions for the
printer to be used.
• Do not attempt the following operations when
the printer is connected ( is on the screen).
The operations may not be performed properly.
– Set the POWER switch to OFF (CHG).
– Disconnect the USB cable from the VCR or
the printer.
– Eject the “Memory Stick Duo” from the VCR.
• If the printer stops working, disconnect the USB
cable, turn the printer off and on again and
restart the operation from the beginning.
Printing
USB cable
(supplied)
To USB
jack
To (USB)
jack
Continued ,