Sony GV-HD700 - Manual (Page 42)

42
Using with an analog video unit and your
computer (Signal convert function)
You can capture pictures from an analog video unit connected to your computer which has the
i.LINK (DV) jack via your VCR.
Connect the VCR to the wall outlet (wall socket) using the supplied AC Adaptor for this
operation (p. 12). You need to install software to capture video signals on your computer, if
necessary. Refer to the instruction manual of your computer and software.
1
Connect the VCR to an analog
video unit and your computer.
2
Set the POWER switch to ON.
3
Press MENU.
The menu screen appears.
4
Select (IN/OUT REC) using
V/v, then press EXEC.
5
Set [A/V tDV OUT] to [ON].
appears on the screen.
6
Start playback on the analog
video unit.
(Red)
(White)
(Yellow)
(White) (Red) (Yellow)
An analog unit with
an S VIDEO jack
An analog unit without
an S VIDEO jack
A/V connecting
cable (optional)
A/V connecting
cable (optional)
i.LINK cable
(optional)
(Red)
(White)
(Yellow)
(Yellow)
S VIDEO cable
(optional)
: Signal flow