Sony GV-HD700 - Manual (Page 13)

13
G
e
tti
ng St
a
rte
d
2
Slide the OPEN . lever and
open the LCD panel.
3
Set the POWER switch to OFF
(CHG) (The default setting).
4
Connect the AC Adaptor to the
DC IN jack on the VCR. Make sure
that the v mark on the DC plug is
facing to the v mark on the VCR.
5
Connect the power cord (mains
lead) to the AC Adaptor and the
wall outlet (wall socket).
The POWER/CHARGE lamp turns on
orange and charging starts.
The POWER/CHARGE lamp turns off
when the battery pack is fully charged.
After charging the battery pack,
disconnect the AC Adaptor from the
DC IN jack on the VCR.
b Notes
• The direction to attach the L series is different
from that of the M series (optional) (p. 14).
Make sure to attach your battery in the correct
direction. If you attempt to attach it in the wrong
direction forcibly, a malfunction may occur.
• Make sure not to come in contact with the other
battery terminal available for other battery packs
when charging your battery pack.
• Disconnect the AC Adaptor from the DC IN
jack by holding both the VCR and the DC plug.
OPEN .
lever
POWER
switch
DC IN jack
DC plug
AC Adaptor
Power cord
(Mains lead)
To the wall outlet
(wall socket)
POWER/
CHARGE lamp
Continued ,