Inserting batteries into the remote control – Sony STR-DH820 User Manual
Page 8
![background image](/manuals/445031/8/background.png)
8
GB
D:\SONY job\STR-DH820_PMRF_02\GB\4266497121\GB01COV_STR-DH820-CELTOC.fm
masterpage: Left
STR-DH820
4-266-497-11(2)
Insert two R6 (size AA) batteries (supplied) by
matching 3 and # on the batteries to the
diagram inside the battery compartment of the
remote control.
Notes
• Do not leave the remote control in an extremely hot
or humid place.
• Do not use a new battery with old ones.
• Do not mix manganese batteries and other kinds of
batteries.
• Do not expose the remote control sensor to direct
sunlight or lighting apparatuses. Doing so may
cause a malfunction.
• If you do not intend to use the remote control for an
extended period of time, remove the batteries to
avoid possible damage from battery leakage and
corrosion.
• When you replace or remove the batteries, the
programmed codes may be cleared. If this happens,
reprogram the remote control (page 80).
• When the receiver no longer responds to the
remote control, replace all the batteries with new
ones.
Inserting batteries into the
remote control