Sony STR-DH820 - Manual (Page 51)

51 GB
D:\SONY job\STR-DH820_PMRF_02\GB\4266497121\GB04GET_STR-DH820-CEL.fm masterpage: Right
STR-DH820
4-266-497-11(2)
T
u
n
e
r Op
era
tio
ns
Listening to FM/AM radio
You can listen to FM and AM broadcasts
through the built-in tuner. Before operation, be
sure you have connected the FM and AM
antennas (aerials) to the receiver (page 33).
Tip
The tuning scale for direct tuning is shown below.
* The AM tuning scale can be changed (page 52).
1
Press GUI MODE.
Press MENU if the GUI menu does not
appear on the TV screen.
2
Select “ FM” or “ AM” from
the menu, then press or b.
The FM or AM menu list appears on the
TV screen.
1
Select “Auto Tuning”, then
press
or b.
2
Press V/v.
Press V to scan from low to high, press v
to scan from high to low.
The receiver stops scanning whenever a
station is received.
In case of poor FM stereo
reception
1 Tune in the station you want to listen to
using Auto Tuning, Direct Tuning
(page 51), or select the preset station you
want (page 52).
2 Press TOOLS/OPTIONS.
3 Select “FM Mode”, then press or b.
4 Select “MONO”, then press .
You can enter the frequency of a station
directly by using the numeric buttons.
1
Select “Direct Tuning”, then
press
or b.
2
Press SHIFT, then press
numeric buttons to enter the
frequency.
Example 1: FM 102.50 MHz
Select 1
b 0 b 2 b 5 (b 0*)
Example 2: AM 1,350 kHz
Select 1
b 3 b 5 b 0
* Press 0 for Europe, Australia and Taiwan
models only.
Tuner Operations
Area FM AM
USA, Canada 100 kHz 10 kHz*
Europe, Australia,
Taiwan 50 kHz 9 kHz
V/v/b,
GUI MODE
MENU
TOOLS/
OPTIONS
SHIFT
Numeric
buttons
Tuning to a station
automatically (Auto Tuning)
Tuning to a station directly
(Direct Tuning)
FM AM
continued