beautypg.com

Standard set menu (continued), Remaining, Remote ctrl (remote control) – Sony HDR-HC1 User Manual

Page 60: Rec lamp (recording lamp), Beep, Guideframe, Color bar, Data code

background image

60

HDR-HC1 2-631-458-11(1)

STANDARD SET menu (Continued)

* Appears only during tape playback.

• The exposure adjustment value (0EV), a shutter

speed, and the aperture value appear when still
images on a “Memory Stick Duo” are played
back.

• appears for a picture recorded using a flash.
• In the DATE/TIME data display, the date and

time are displayed in the same area. If you
record a picture without setting the clock, [--- --
----] and [--:--:--] will appear.

REMAINING

AUTO

Displays the remaining tape indicator for
about 8 seconds in situations such as those
described below.

• When you set the POWER switch to PLAY/

EDIT or CAMERA-TAPE with a cassette
inserted.

• When you touch

(Play/Pause).

ON

Always displays the remaining tape
indicator.

REMOTE CTRL (Remote control)

The default setting is [ON], allowing you to
use the Remote Commander (p. 34).

• Set to [OFF] to prevent your camcorder from

responding to a command sent by another VCR
remote control unit.

REC LAMP (Recording lamp)

The camera recording lamp will not light
up during recording when you set this to
[OFF]. (The default setting is [ON].)

BEEP

ON

A melody sounds when you start/stop
recording, or operate the touch panel.

OFF

Cancels the melody.

– [TV TYPE] (p. 59)
– [VCR HDV/DV] (when setting the POWER

switch to PLAY/EDIT) (p. 56)

GUIDEFRAME

You can display the frame and check that
the subject is horizontal or vertical by
setting [GUIDEFRAME] to [ON]. The
frame is not recorded. Press DISPLAY/
BATT INFO to make the frame disappear.

• Pointing the subject at the cross point of the

guide frame makes a balanced composition.

COLOR BAR

You can display the color bar or record it
on the tape by setting [COLOR BAR] to
[ON]. It is convenient to adjust the color on
the monitor connected.

DATA CODE

During playback, displays the information
recorded automatically (data code) during
recording.
OFF

Data code is not displayed.

DATE/TIME

Displays the date and time.

CAMERA DATA (below)

Displays camera setting data.

0:00:00:00

60min

AWB

100

9dB

F1. 8

AUTO

1
2

3

4

5

6

SteadyShot off

*

Exposure

*

White balance

*

Gain

*

Shutter speed

Aperture value