beautypg.com

Using the remote control, Range finder, Windage and elevation – ATN MK 6600 User Manual

Page 7

background image

5

6

USING THE REMOTE CONTROL

Below the control box you can find the panel with two

screws to fix Aries MK6600/6650/7700/7750/8700/

8750.
To plug in the remote control, remove the screws and the

small panel to disclose the inlet.
The three remote control buttons’ function similarly to

control box buttons. Once the remote control is plugged in

you may use both panels to adjust the scope.
The remote control can be attached to the weapon of your

choice through whatever means best suiting your shoot-

ing style and grip. We suggest an elastic Velcro® loop

fastener similar to the trigger switches found on the weapon mounted laser pointers.

RANGE FINDER

The range finder reticle in your Aries MK6600/7700/

8700 has been designed to assist you in determining

the range of your target. These distances are based

on a 6’ target. A 6’ target fits between the numbered

baseline (the three short horizontal lines just next to

the numbers) and the main horizontal line. If the 6’

target fits between the 1 and the right horizontal posts

of the main line the target is 100 yards away. If the

same target fits between the 2 and the right post of the

main line the target is 200 yards away. The same is

with the three, the target is 300 yards away.

If the “Red on Green” reticule is not perpendicular to

the bore of the rifle, it can be adjusted by doing the

following:
1. Unscrew the cover between the windage and eleva-

tion adjustments.
2. Loosen the flat-head screw about 1/2 - 3/4 of a turn.
3. Rotate the central threaded shaft with two notches

as needed (make sure that you do not rotate the round

plate mounted on this shaft individually. They will

rotate together, but if you move the plate itself, if will

interfere with the focus of the reticule).

WINDAGE AND ELEVATION

To adjust vertical and horizontal positions for the

Aries MK6600/6650/7700/7750/8700/8750 turn the

elevation and windage adjustment mechanisms. Each

click equals to 1/8 inch at 100 yards. Do not use force

having reached the maximum of rotation.

1

2

3

If a 6` target fits between

these two lines then the

target is 100 yards away

If a 6` target fits between

these two lines then the

target is 300 yards away

Windage

Elevation

3 2 1