Focusing – ATN MK 6600 User Manual

Page 6

FOCUSING

To focus the Aries MK6600/6650/7700/7750/8700/8750 you need to adjust the diopter first thing.

Simply turn the diopter clockwise until it stops. Then concentrate on any object and slowly turn the

diopter back counter clockwise until the grain in the image is sharp.
When you are under low-light conditions and the daylight filter is off you may focus the front lens for

the image to be sharp. The diopter is not to be adjusted.

NOTE: The front lens should be readjusted for viewing objects at different distances.

You scope has ability to focus either long range or short. To adjust focus unlock front lens with the

Large Allen wrench (included with scope). After focusing lens to desired distance re-lock lens in

place to insure no movement of reticle while shooting.

NOTE:To remove the front lens to clean, you must unlock the above set screw.

MOUNTING THE ARIES MK6600/6650/7700/7750/8700/8750

1. Slightly loosen the horizontal and vertical fixing screws on the 7/8” weaver rail built into the

MK6600/6650/7700/7750/8700/8750.
2. Place the scope on the dovetail mount of the fire arm making certain that the mount aligns with the

receptor attachment screw groove. Adjust as necessary.
3. Tighten the horizontal fixing screws.

NOTE: Receptor attachment screws may need to be tightened after continuous shooting.

Fixator screws

Diopter

Front lens

Insert large allen wrench

here to lock/unlock and

to remove lens